汉众斯管 软管接头

Hydroscand has one of the biggest assortment of hydraulic fittings in the industry. We carry e.g. G-, M-, NPT-, UNF-, and ORFS-thread for all hose types.

cross over fitting logo.JPG

 

Hydroscand’s Cross Over Fittings are suitable for both spiral and braided hoses. They are recommended for a wide range of fluids such as hydraulic oil, solvents, gases, water cleaning equipment etc. All fittings are manufactured in one piece except for the compact bend which are soldered.







There are three types of nuts on the Hydroscand fittings, they can be recognised by the different suffixes in their part numbers:

The part number has no suffix =
The fitting is delivered with a crimped nut.
The part number has suffix 1 =
The fitting is delivered with a thrust wire nut.
The part number has suffix 2 =
The fitting is delivered with a slip-on nut which is kept in place with a plastic washer.
Please note that the working pressure is reduced for Deltaflex and Gammaflex5 above 1".

The following working pressures are recommended:

 

WP LIST.JPG


Working Pressure in MPa
1 MPa = 10 Bar = 145 psi

For heavy duty applications with Deltaflex or Gammaflex5 we recommend our Interlock series (4400).

A correct assembly makes a safe unit. Always follow the assembling instruction.